Browse all practice questions for the Introduction to Engineering Design (IED) EOC Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Introduction to Engineering Design (IED) EOC Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Graphic Design is defined as which of the following?
  • Which term would you use to describe a three-dimensional representation used for physical testing and evaluation of form and fit?
  • Which option best describes an engineer?
  • What does the International Organization for Standardization do?
  • What shape characterizes a normal distribution?
  • Which of the following is a consequence of over-dimensioning a sketch?
  • What is an offset and how is it used?
  • Which term defines the acceptable amount of dimensional variation that will still allow an object to function correctly?
  • Which term means symmetry about a central axis?
  • Which drawing contains views projected onto two or more orthographic planes?
  • Isometric Sketch is defined by which property?
  • What is the name of the line drawn on a drawing to define where a cut is made to create a section plane?
  • What is the difference between a mate constraint and a flush constraint in CAD modeling?
  • Which term defines a repeated decorative design?
  • Which of the following is NOT one of the six steps in the design process?
  • What is a Pictorial Sketch?
  • Which line represents distance between two points or features?
  • Which term refers to a tolerance that permits variation in both directions from the nominal size?
  • Which drawing type projects views onto two or more orthographic planes?
  • How is Brainstorm best defined?
  • Which statement best defines asymmetry in design?
  • Which organization is known for setting codes and standards for mechanical devices in the United States?
  • What are Section Lines used for?
  • What is a constraint?
  • Which term describes the process of choosing and using appropriate mathematics and statistics to analyze empirical situations, understand them better, and improve decisions?
  • Balance in visual design is best described as which of the following?
  • Which term defines the tightest possible fit between two mating parts?
  • Which elements are identified in a design brief?
  • Why is placement of dimensions important?
  • Reverse Engineering is the process of taking something apart and analyzing its workings in detail.
  • Which statement describes symmetry in design?
  • Which organization is a worldwide body that creates engineering standards?
  • Rhythm in design refers to which concept?
  • Which approach reflects outside-the-box thinking to solve problems?
  • Which pictorial represents height, width, and depth at full scale?
  • What is the term for a section of an object that is broken away to reveal an interior feature for a sectional drawing?
  • What is a Work Axis?
  • What is the term for the amount of overlap that one part has with another when assembled?
  • Graphic Design primarily involves combining which elements?
  • Tapped Holes are defined as which?
  • Which statement best describes a tapped hole?
  • What is the purpose of a Decision Matrix?
  • Which line is lightly drawn to guide drawing other lines and shapes?
  • Which term describes a tolerance in which variation is permitted in both directions from the specified dimension?
  • Which step in the design process involves constructing and testing a prototype?
  • A location dimension defines the relationship of features of an object. What is this type of dimension called?
  • Which pictorial representation uses depth at full scale relative to height and width?
  • Which line is used to represent the visible edges of an object on a technical drawing?
  • Which term defines the amount of 3-dimensional space occupied by an object?
  • Which projection method represents three-dimensional objects on a plane having only length and breadth?
  • Which term matches the definition: The state of being noticeably different from something else when put or considered together?
  • Which statement describes a normal distribution correctly?
  • Which line type represents an edge that is not directly visible?
  • Rhythm refers to the regular recurrence of visual elements that guides the viewer through a composition. Which term is this describing?
  • Which graph is most suitable for showing frequency distribution of numerical data?
  • Which concept describes the lines of intersection created from three mutually perpendicular planes?
  • Which term describes the lightness or darkness of a color in relation to a scale from white to black?
  • Which operation would you use to create a solid of revolution from a profile?
  • Which term describes a CAD modeling method that uses parameters to define the size and geometry of features?
  • Which term describes the US federal agency dedicated to protecting human health and the environment?
  • Which sketch is typically used to convey depth using perspective with vanishing points?
  • Which statement best describes design?
  • Which term describes a design that ensures a clearance always results when mating parts are assembled?
  • Which term defines constant, non-numerical relationships between the parts of a geometric figure, such as parallelism or perpendicularity?
  • Which characteristic is typical of a virtual team?
  • Which term is a type of 3D CAD modeling that represents the volume of an object, not just its lines and surfaces, allowing analysis of mass properties?
  • Which sections are typically found in the main Text of a technical report?
  • What is a Work Point?
  • Which term is defined as a dimension that repeats a given dimension or is established from other values shown on a drawing, and is typically enclosed in parentheses?
  • Which instrument is best described as having two adjustable jaws used to measure distance or thickness?
  • Which organization is a private, non-profit organization that coordinates standards in the United States?
  • Differentiate invention from innovation.
  • In reverse engineering, what is the primary purpose of using a black box systems model?
  • Emphasis in design refers to
  • Which quantity measures how much matter is packed into a given volume?
  • Which view is used to magnify features that are too small to specify in other views?
  • Color in design is defined as which of the following?
  • What term defines the two-dimensional contour that characterizes an object or area, in contrast to three-dimensional form?
  • What advantage does CAD provide over traditional paper and pencil design?
  • Why do engineers perform reverse engineering on products?
  • Which term describes the degree of closeness of measurements to the actual value?
  • Tonal shading refers to what in a sketch or map?
  • Which term describes a repeated decorative design?
  • Which term describes the surface feel or texture?
  • Which term describes a sectional drawing based on a cutting plane line that extends completely through the object?
  • Which term describes a triangle that has a 90 degree angle?
  • Which term describes the quantitative relation between two amounts showing how many times one value contains the other?
  • What needs to be addressed in a Design Brief?
  • Which line is used to guide the placement of other lines and shapes?
  • What term describes 'Special importance, value, or prominence given to something'?
  • What is the primary purpose of sketching ideas?
  • Which statement best defines a virtual team?
  • Color is defined as the property possessed by an object of producing different sensations on the eye due to the way it reflects or emits light. Which term is this?
  • Which statement best defines an acute triangle?
  • Which term refers to the activity of gathering information about consumers' needs and preferences?
  • Which view would you choose to show details not visible on the exterior?
  • In a CAD program, how is a geometric constraint different from a numeric constraint?
  • Which term describes an enlarged or reduced representation of an object that is usually intended for study purposes?
  • Which statement describes standard deviation in data sets?
  • OSHA's responsibilities include
  • Which statement best describes a geometric constraint in CAD?
  • Which term refers to the feel, appearance, or consistency of a surface, substance, or fabric?
  • What is the role of models in the design process?
  • Which line represents where a dimension starts and stops?
  • Principal Axes refer to which concept?
  • What is the purpose of sketching ideas?
  • What is the difference between the largest and smallest values in a data set?
  • What is the purpose and what are the sections of a technical report?
  • The primary reliance of a virtual team is on
  • In drawings, a dimension value enclosed in parentheses often indicates a dimenson used for information only. What is this type called?
  • Which term refers to a part or element of a larger whole?
  • Which term refers to a collection of drawings that provide instructions to manufacture and assemble a product?
  • Which option best describes OSHA?
  • Which statement best describes ethics?
  • A dimension, usually without a tolerance, used for information purposes only and often enclosed in parentheses on the drawing is called:
  • In reverse engineering, which analysis focuses on what a product looks like and how it appears?
  • Which term describes balance where elements are mirrored across a central axis?
  • Which portfolio page is used to show how components fit together and assembly relationships?
  • Which drawing contains all the information necessary to manufacture one part?
  • In design, Form is best described as which option?
  • Centroid is best described as which of the following?
  • Which line defines the centers of arcs, circles, or symmetrical parts?
  • Which statement best describes a histogram?
  • Which term refers to the digits in a decimal number that carry meaning contributing to the precision or accuracy?
  • Which term describes symmetry about a central axis?
  • Which option correctly defines statistics in engineering data analysis?
  • Norms differ from laws in that they are...
  • OSHA achieves its mission through...
  • Which approach reflects thinking outside the box to create the best possible solution?
  • Norms are...
  • Ethics influence conduct by...
  • What is a cylindrical recess around a hole, typically to receive a bolt head or nut?
  • Which term refers to the property of a system whose value determines how the system will behave?
  • What is Countersink?
  • Which portfolio page typically indicates how components fit together and shows assembly relationships via exploded view?
  • Which term describes drawing a figure inside another so that their boundaries touch but do not intersect?
  • Which term refers to the curve formed at the interior intersection between two or more surfaces?
  • Which term is the value that occurs most frequently in a data set?
  • What is an engineering notebook?
  • Which construction feature defines a point in three-dimensional space and can be incorporated into dimension and constraint schemes?
  • Which term refers to an enlarged or reduced representation used for examination and study?
  • A Multi-View Drawing is best described as?
  • Which pictorial represents depth as half scale compared to height and width?
  • Which dimensioning system requires all dimensions to be placed from a datum rather than feature to feature?
  • Chain Dimensioning is commonly known as:
  • Tangent is defined as which of the following?
  • Which term represents the geometric center of a solid?
  • Which statement best describes the use of a prototype?
  • Which description best defines statistics in engineering data analysis?
  • Norms are best described as
  • Which 3D CAD function could be used to create a wire paper clip?
  • What is a Parts List?
  • Which of the following is a best practice for the Engineering Notebook?
  • Which term describes a line that extends forever in two directions and is useful for locating the center of a hole or cylinder?
  • Which term is used for a view that provides a magnified look at a small feature?
  • Which feature is placed to seat a bolt head or nut by creating a cylindrical recess around a hole?
  • What do you need to know in order to perform a physical property analysis?
  • What term describes the gradual reduction in width or thickness along the length of an elongated object?
  • Which option correctly defines proportion in design terms?
  • Which term describes the center of distribution: mean, median, and mode?
  • Exploded Assembly refers to an assembly drawing where components are separated along an axis to reveal how parts fit together. Which term describes this?
  • What is the role of constraints in a design brief?
  • Ethics are...
  • Which term means to add explanatory notes to a drawing?
  • Baseline Dimensioning is also referred to as:
  • Which of the following is NOT listed as an engineering discipline in the material?
  • Phantom Line is best described as which option?
  • Which sketch represents an object with true width and height, while the depth can be any size and drawn at any angle?
  • Which term describes a triangle with one angle greater than 90 degrees?
  • Which study focuses on designing workplace equipment to maximize safety and efficiency?
  • Which term refers to drawings that convey all of the information needed to manufacture and assemble a design?
  • Which items are typically included in the Front Matter of a technical report?
  • How can statistical and analyzed data be used to inform, justify, and validate a design or process?
  • Center of Gravity is defined as which of the following?
  • Which term describes attributes such as material and density, i.e., physical properties?
  • Volume is defined as which of the following?
  • Which term describes the relationship of parts to a whole in size or quantity?
  • Which term describes the degree to which repeated measurements show the same result?
  • Which term is used to indicate where the cutting plane line has cut through material in a drawing?
  • What is research?
  • What is one of the four best practices for the Engineering Notebook?
  • In a black box representation, what is typically assumed about the internal components?
  • Which sections comprise the Back Matter of a technical report?
  • Which line is used to indicate the center of symmetry for arcs and circles?
  • What is a sectional drawing that cuts through one-quarter of an object called?
  • Which sequence correctly lists the three steps of reverse engineering?
  • Which drawing type reveals interior features by cutting completely through the object?
  • Which statement best describes a virtual team?
  • Which of the following is the first step in the design process?
  • Which term is used to describe a curved transition between two surfaces?
  • Which term describes the systematic use of mathematics to analyze data and guide decisions?
  • What is an Auxillary View used for?
  • Which term describes a modeling approach that analyzes the geometry's volume rather than just its edges?
  • What term refers to a hole that does not go completely through the workpiece?
  • What is the primary purpose of performing dimensional analysis on a part?
  • Which line type would you use to show hidden features behind surfaces?
  • Which statement is true about significant digits?
  • Why do designers need to fully dimension a part?
  • Which description best defines engineering?
  • Why would you have to know how to convert measurements when looking at a technical drawing?
  • Which term is a measure of center in a set of numerical data?
  • Rib refers to which of the following?
  • Which term describes a visual, mathematical, or three-dimensional representation in detail of an object or design, often smaller than the original?
  • Angled surfaces can be dimensioned using what methods?
  • What are the three spatial dimensions typically used in engineering drawings?
  • What is a design brief used for?
  • Which statement describes a Perspective Sketch?
  • Which term refers to the nominal size designation used for a commercial product?
  • In sketching, what does proportion refer to?
  • What term best describes an engineering notebook?
  • What feature could be used to create a 3D representation of a baseball bat that was created on a wood lathe?
  • What does standard deviation measure?
  • Phantom Line is used to show alternate positions without interfering with the main drawing. Which option best describes Phantom Line?
  • Why do engineers generally adhere to a set of dimensioning standards and guidelines?
  • Which view shows details not obvious on the exterior of the part?
  • What is the designation of the size established for a commercial product?
  • How does the material chosen for a product impact the design of the product?
  • Which line indicates dimensions of arcs, circles and detail?
  • Which type of drawing is used to show the material, size, and shape of a product for manufacturing purposes?
  • Density is defined as which of the following?
  • Which statement explains why realistic sketches boost design competence?
  • Which term describes a full-scale working model used to test a design concept by making actual observations and necessary adjustments?
  • What is a design brief?
  • OSHA's mission includes...
  • Which line is a heavy solid line used to depict the outline of an object?
  • Which term describes the degree to which repeated measurements show the same result?
  • What is Technical Writing?
  • What measuring instrument having two adjustable jaws typically used to measure distance or thickness?
  • In a team, norms function to...
  • Ratio is best described as?
  • Which statement best describes Aligned Dimensioning?
  • Which organization coordinates the development and use of voluntary consensus standards in the United States?
  • What is the process of a portfolio? How do what information to include in a portfolio?
  • What is Market Research?
  • What best defines a design statement?
  • Which sketch is defined by depth that can be any size and drawn at any angle?
  • What is a subassembly?
  • Which term describes a physical representation of an object; prototypes and appearance models are examples?
  • What does it mean when a sketch is over dimensioned?
  • Circumscribe means to do which of the following?
  • How can we use technology to make the design and manufacture of a product more efficient and less prone to error?
  • Which activities are part of generating potential solutions?
  • What term best describes the Engineering Notebook's role in patent activities?
  • Which concept is a 3D point where the total weight may be considered concentrated?
  • What constraint would you use to place a pin inside a hole?
  • What is a prototype?
  • Which term describes the gradual diminution of width or thickness along the length of an elongated object?
  • Which term describes a dimension that repeats a given dimension or is established from other values shown on a drawing, typically enclosed in parentheses?
  • What is a Work Plane in design terms?
  • Which term is the study of designing workplaces to maximize safety and efficiency?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy